Portal
06-11-2022, 04:50 PM
Reviews : 0 • Reading : 1092
#MatchMasters FREE 150 COINS 👇
Grab a gift: 👇
👉 COLLECT 👈
![[Image: 59CHXh3.jpg]](https://i.imgur.com/59CHXh3.jpg)
Grab a gift: 👇
👉 COLLECT 👈
06-11-2022, 12:48 PM
Reviews : 1 • Reading : 1855
#MatchMasters FREE 1 RANDOM STICKER 👇
Grab a gift: 👇
👉 COLLECT 👈
![[Image: wh3yaey.jpg]](https://i.imgur.com/wh3yaey.jpg)
Grab a gift: 👇
👉 COLLECT 👈
06-10-2022, 08:47 PM
Reviews : 0 • Reading : 1653
#MatchMasters FREE 200 COINS 👇
Grab a gift: 👇
👉 COLLECT 👈
![[Image: Ff6QyqL.jpg]](https://i.imgur.com/Ff6QyqL.jpg)
Grab a gift: 👇
👉 COLLECT 👈
06-10-2022, 08:27 PM
Reviews : 0 • Reading : 1181
#MatchMasters FREE 150 COINS 👇
Grab a gift: 👇
👉 COLLECT 👈
Grab a gift: 👇
👉 COLLECT 👈
06-10-2022, 12:35 PM
Reviews : 0 • Reading : 1166
#MatchMasters FREE 1 RANDOM STICKER 👇
Grab a gift: 👇
👉 COLLECT 👈
Grab a gift: 👇
👉 COLLECT 👈
06-10-2022, 11:41 AM
Reviews : 0 • Reading : 1069
#MatchMasters FREE 2 SPINS 👇
Grab a gift: 👇
👉 COLLECT 👈
![[Image: igbzV7I.jpg]](https://i.imgur.com/igbzV7I.jpg)
Grab a gift: 👇
👉 COLLECT 👈
06-10-2022, 04:55 AM
Reviews : 0 • Reading : 616
Copper braided wire is used for soft connecting wires of electrical devices, switch electrical, electric furnaces and batteries. The copper braided wire is made of high-quality round copper wire or tinned soft round copper wire braided by multiple strands in a single layer or multiple layers.
Tinned copper braid is a type of multiconductor cable that is a tight weave of soft drawn tinned copper wire. Tinned copper braid will give you more flexibility, because of its considerably lighter cable from an installation point of view. In addition, since the material has been made of copper, it allows the armored to be used as ground cable when it’s necessary.
Copper stranded wire is made of a quantity of thin (usually copper) strands that are twisted and bundled together and generally enclosed in a PVC material to form a multi-stranded conductor. Stranded wires are mainly used for indoor applications.
Copper flexible connectors provide a low resistance flex connector between two rigid bus bar sections that have dynamic motion. Flexible connectors are widely used in electrical distribution, switchgear industries because of excellent flexibility.
Bare copper wire is the most commonly used type of copper wire and is often referred to with the general term “grounding wire.” It does not have any sort of protective coating, however, the lack of insulation allows bare copper to have the best conductive properties. As a base, the wire contained within acts as a ground.
Silver bonding wires have been developed as a perfect combination of significant cost reduction compared to gold and required bonding features for sensitive devices. They achieve good reliability and excellent bondability. With a diameter up to a size of 0.6 mils / 15 microns they are suitable for fine structures with an ultra-fine pitch.
A wire harness, also commonly referred to as a wiring harness, is an exterior sheath used to cover some types of electronic wires. Generally, wiring harnesses are made of thermoplastic or thermoset materials that can help protect the cables from the environment.
High temperature wire is often defined as a wire with a temperature rating of 125°C or higher, although high-temperature can also refer to temperature ratings as low as 90°C. High-temperature cables can either be single-conductor or multiconductor.
Silicone rubber wire is a wire where silicone (a type of rubber) is used as the insulator around the wire. Silicone wire is well known for its flexibility and heat resistance and is highly recommended within extreme temperature environments. These wires usually have a temperature resistance up to + 250°C.
PVC wire is wire with an insulating jacket made from polyvinyl chloride, a soft plastic. It is usually used for low-voltage applications where the wire will be enclosed inside equipment or a raceway. It produces toxic gases when it burns and so is not run exposed in walls or ceilings.
Tinned copper braid is a type of multiconductor cable that is a tight weave of soft drawn tinned copper wire. Tinned copper braid will give you more flexibility, because of its considerably lighter cable from an installation point of view. In addition, since the material has been made of copper, it allows the armored to be used as ground cable when it’s necessary.
Copper stranded wire is made of a quantity of thin (usually copper) strands that are twisted and bundled together and generally enclosed in a PVC material to form a multi-stranded conductor. Stranded wires are mainly used for indoor applications.
Copper flexible connectors provide a low resistance flex connector between two rigid bus bar sections that have dynamic motion. Flexible connectors are widely used in electrical distribution, switchgear industries because of excellent flexibility.
Bare copper wire is the most commonly used type of copper wire and is often referred to with the general term “grounding wire.” It does not have any sort of protective coating, however, the lack of insulation allows bare copper to have the best conductive properties. As a base, the wire contained within acts as a ground.
Silver bonding wires have been developed as a perfect combination of significant cost reduction compared to gold and required bonding features for sensitive devices. They achieve good reliability and excellent bondability. With a diameter up to a size of 0.6 mils / 15 microns they are suitable for fine structures with an ultra-fine pitch.
A wire harness, also commonly referred to as a wiring harness, is an exterior sheath used to cover some types of electronic wires. Generally, wiring harnesses are made of thermoplastic or thermoset materials that can help protect the cables from the environment.
High temperature wire is often defined as a wire with a temperature rating of 125°C or higher, although high-temperature can also refer to temperature ratings as low as 90°C. High-temperature cables can either be single-conductor or multiconductor.
Silicone rubber wire is a wire where silicone (a type of rubber) is used as the insulator around the wire. Silicone wire is well known for its flexibility and heat resistance and is highly recommended within extreme temperature environments. These wires usually have a temperature resistance up to + 250°C.
PVC wire is wire with an insulating jacket made from polyvinyl chloride, a soft plastic. It is usually used for low-voltage applications where the wire will be enclosed inside equipment or a raceway. It produces toxic gases when it burns and so is not run exposed in walls or ceilings.
06-10-2022, 04:54 AM
Reviews : 0 • Reading : 641
A dining chair is part of a dining room furniture set. A set of dining room chairs, often six or more, is arranged around a dining room table. A dining chair is a small chair with a frame that is not upholstered. It has a solid frame and it may or may not have arms. The seat and back may or may not be upholstered.
Accent chairs are chairs that are placed strategically in a room to provide additional seating. There are two approaches to making use of an accent chair. One approach is to place the chair in a position that complements or accents the colors and textures of larger pieces, such as a sofa. A second approach to the use of this type of chair is to create a secondary seating area within the room.
Ergonomic accent chair is brimming with mid-century flair. This chair accents a modern living room setup and creates a comforting retreat - as the name suggests. Its inviting curved contours, organic shapes, soft padded upholstery and a footstool supports countless seating positions.
A swivel accent chair is one in which may rotate the seat about a central point to face in a new direction without moving the legs. Swivel chairs with wheels on the base allow users to move the chair around their workspace without getting up. This style is commonly found in modern offices and is also known as office chairs.
Barstools are a type of tall stool, often with a foot rest to support the feet. The height and narrowness of bar stools makes them suitable for use at bars and high tables in pubs or bars. There are many different types, construction materials and models. Bar stools are often made of wood or metal. There are bar stools with and without armrests, backs, and padding or upholstery on the seat surface. Bar stools can range from basic wooden designs to more complex ones with adjustable height. Extra tall and extra short are common features, as well as indoor bar stools and outdoor bar stools. Some bar stools have backs, while most do not.
Leather barstool uses a good stool fabric, leather. The material is hard to rip, tear, or put holes into it. Also, it is easy to clean and can resist stains. An leather bar stool is a protean seating option that can add some color and character to any living space or commercial establishment. It looks classy, is comfortable and can also be your go-to seating for impromptu meal preps on the kitchen island.
Fabric barstool has backs. And when sitting on it, you fell comfortable, warm and soft. Also, it is decorative, easy to clean, resists stains, and is hard to tear or rip. Plus, it is also waterproof.
Metal frame barstool is made of quality metal with classic textured melamine veneer. The mixed materials combine the notably rustic with modern style. Barstool is ideal for a kitchen eating area, living room, party room, country pub, or basement bar. It's easy to match for most themes. This bar stool is rustic in feel with modern appeal with a wrap-around foot rest for comfort.
An ottoman is a form of couch that usually has a head but no back, although sometimes it has neither. It may have square or semicircular ends, and as a rule it is what upholsterers call "overstuffed", meaning no wood is visible. It may be used as a stool, footstool or as an alternative to a sofa. Ottomans are often sold as coordinating furniture with armchairs or gliders.
A bench (furniture) is a type of chair that commonly can hold 1-5 people at one time although a bench can be made to support more people if the area has the demand. Most benches are in public areas such as: Parks, Airports, Subways, and on large city roads.
Accent chairs are chairs that are placed strategically in a room to provide additional seating. There are two approaches to making use of an accent chair. One approach is to place the chair in a position that complements or accents the colors and textures of larger pieces, such as a sofa. A second approach to the use of this type of chair is to create a secondary seating area within the room.
Ergonomic accent chair is brimming with mid-century flair. This chair accents a modern living room setup and creates a comforting retreat - as the name suggests. Its inviting curved contours, organic shapes, soft padded upholstery and a footstool supports countless seating positions.
A swivel accent chair is one in which may rotate the seat about a central point to face in a new direction without moving the legs. Swivel chairs with wheels on the base allow users to move the chair around their workspace without getting up. This style is commonly found in modern offices and is also known as office chairs.
Barstools are a type of tall stool, often with a foot rest to support the feet. The height and narrowness of bar stools makes them suitable for use at bars and high tables in pubs or bars. There are many different types, construction materials and models. Bar stools are often made of wood or metal. There are bar stools with and without armrests, backs, and padding or upholstery on the seat surface. Bar stools can range from basic wooden designs to more complex ones with adjustable height. Extra tall and extra short are common features, as well as indoor bar stools and outdoor bar stools. Some bar stools have backs, while most do not.
Leather barstool uses a good stool fabric, leather. The material is hard to rip, tear, or put holes into it. Also, it is easy to clean and can resist stains. An leather bar stool is a protean seating option that can add some color and character to any living space or commercial establishment. It looks classy, is comfortable and can also be your go-to seating for impromptu meal preps on the kitchen island.
Fabric barstool has backs. And when sitting on it, you fell comfortable, warm and soft. Also, it is decorative, easy to clean, resists stains, and is hard to tear or rip. Plus, it is also waterproof.
Metal frame barstool is made of quality metal with classic textured melamine veneer. The mixed materials combine the notably rustic with modern style. Barstool is ideal for a kitchen eating area, living room, party room, country pub, or basement bar. It's easy to match for most themes. This bar stool is rustic in feel with modern appeal with a wrap-around foot rest for comfort.
An ottoman is a form of couch that usually has a head but no back, although sometimes it has neither. It may have square or semicircular ends, and as a rule it is what upholsterers call "overstuffed", meaning no wood is visible. It may be used as a stool, footstool or as an alternative to a sofa. Ottomans are often sold as coordinating furniture with armchairs or gliders.
A bench (furniture) is a type of chair that commonly can hold 1-5 people at one time although a bench can be made to support more people if the area has the demand. Most benches are in public areas such as: Parks, Airports, Subways, and on large city roads.
06-10-2022, 04:52 AM
Reviews : 0 • Reading : 572
Drills bits are cutting tools used to remove material to create holes, almost always of circular cross-section. Drills come in many sizes and shapes and can create different kinds of holes in many different materials. In order to create holes drill bits are usually attached to a drill, which powers them to cut through the workpiece, typically by rotation. The drill will grasp the upper end of a bit called the shank in the chuck.
SDS plus drill bits are used for drilling into hard materials such as brick and concrete with minimal effort. The SDS part refers to the shank type, which has two sets of grooves that snap into the chuck making it more secure and allowing the bit to slide up and down giving you the hammer action.These bits are interchangeable with SDS drill bits and are available in a variety of sizes. As they are thinner, they are ideal for smaller holes.
SDS max drill bit is intended to drill larger holes and work in more extreme conditions. It is a drill bit that offers higher speed and drills with more power. It is therefore ideal for drilling on hard surfaces and for drilling larger holes.These bits have three open grooves, with a locking segment attached to the grooves rather than locking balls. They are made for bigger hammer drills and make bigger holes. SDS Max chisels are also available that can be used for chipping, digging, chiselling, and other heavy-duty work.
Square drill bits are also called mortise bits, and the best ones fit universally in most mortising machines and drill presses that have hammering functions.
An SDS hex drill bit is, as its name suggests, a bit designed to be used with an SDS rotary hammer drill. The dual action of rotation coupled with proper hammering makes chiseling and drilling through hard materials much easier than with a standard drill bit. An SDS bit is quite different than a standard bit and is composed of five parts.
A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.The handle and blade of some types of chisel are made of metal or of wood with a sharp edge in it.
SDS plus chisel delivers clean and fast removal of wall and floor tiles. Self-sharpening spade body retains uniform thickness throughout its lifetime for consistently high removal rates. Angled cutting edge and self-sharpening design are for a long life and a 30%-higher material removal rate.
SDS max chisels are made from high grade, forged steel, providing up to 20% longer life. These chisels are specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. Hole saws typically have a pilot drill bit (arbor) at their center to keep the saw teeth from walking. The fact that a hole saw creates the hole without needing to cut up the core often makes it preferable to twist drills or spade drills for relatively large holes (especially those larger than 25 millimetres (1.0 inch)). The same hole can be made faster and using less power.
A glass drill bit is typically used with an electric drill to create holes in glass. It may also be used for tile, ceramics and similar materials. The bit is coated with diamond pieces that act like sandpaper to rub holes in the material being drilled without cracking or breakage. The glass bit is smooth, straight and has a rough texture.The glass drill bit doesn’t have any flutes, because when a hole is drilled in glass the excess material is fine enough that it turns to dust rather than shavings that must be removed from the hole.
SDS plus drill bits are used for drilling into hard materials such as brick and concrete with minimal effort. The SDS part refers to the shank type, which has two sets of grooves that snap into the chuck making it more secure and allowing the bit to slide up and down giving you the hammer action.These bits are interchangeable with SDS drill bits and are available in a variety of sizes. As they are thinner, they are ideal for smaller holes.
SDS max drill bit is intended to drill larger holes and work in more extreme conditions. It is a drill bit that offers higher speed and drills with more power. It is therefore ideal for drilling on hard surfaces and for drilling larger holes.These bits have three open grooves, with a locking segment attached to the grooves rather than locking balls. They are made for bigger hammer drills and make bigger holes. SDS Max chisels are also available that can be used for chipping, digging, chiselling, and other heavy-duty work.
Square drill bits are also called mortise bits, and the best ones fit universally in most mortising machines and drill presses that have hammering functions.
An SDS hex drill bit is, as its name suggests, a bit designed to be used with an SDS rotary hammer drill. The dual action of rotation coupled with proper hammering makes chiseling and drilling through hard materials much easier than with a standard drill bit. An SDS bit is quite different than a standard bit and is composed of five parts.
A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.The handle and blade of some types of chisel are made of metal or of wood with a sharp edge in it.
SDS plus chisel delivers clean and fast removal of wall and floor tiles. Self-sharpening spade body retains uniform thickness throughout its lifetime for consistently high removal rates. Angled cutting edge and self-sharpening design are for a long life and a 30%-higher material removal rate.
SDS max chisels are made from high grade, forged steel, providing up to 20% longer life. These chisels are specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. Hole saws typically have a pilot drill bit (arbor) at their center to keep the saw teeth from walking. The fact that a hole saw creates the hole without needing to cut up the core often makes it preferable to twist drills or spade drills for relatively large holes (especially those larger than 25 millimetres (1.0 inch)). The same hole can be made faster and using less power.
A glass drill bit is typically used with an electric drill to create holes in glass. It may also be used for tile, ceramics and similar materials. The bit is coated with diamond pieces that act like sandpaper to rub holes in the material being drilled without cracking or breakage. The glass bit is smooth, straight and has a rough texture.The glass drill bit doesn’t have any flutes, because when a hole is drilled in glass the excess material is fine enough that it turns to dust rather than shavings that must be removed from the hole.
06-10-2022, 04:51 AM
Reviews : 0 • Reading : 665
A wood cutting machine is equipment used to change the size and shape of semifinished wood goods and parts by manually or mechanically cutting the wood and removing the shavings (lathes). Many woodcutting machine tools can cut at speeds of up to 60–100 m/sec and feed at rates of 100–180 m/min. The most common types are saws, shapers, and drills.
A table panel saw is any type of sawing machine that cuts sheets into sized parts. Panel saws can be vertical or horizontal. Typically, vertical saws take up less floor space. Panel saws can have one main saw blade or a scoring along with the main saw blade. Scoring is used to create a groove, especially in double side laminate before the main saw rips the piece in two, to avoid chipping. The scoring saw rotates in an opposite direction, as the main saw to avoid chipping.
A wood sanding machine is a power tool used to smooth surfaces by abrasion with sandpaper. Sanders have the means to attach the sandpaper and a mechanism to move it rapidly contained within a housing with means to hand-hold it or fix it to a workbench. There are different types of wood sanding machines including belt sander, orbital sander, disc sander, polish sander, brush sander, electric sander or vibration sander.
Wire brush machine is an industrial strength crevice cleaner. It's ideal for the removal of debris and weeds from asphalt and concrete cracks. The wire brush is primarily an abrasive implement, used for cleaning rust and removing paint. It is also used to clean surfaces and to create a better conductive area for attaching electrical connections, such as those between car battery posts and their connectors, should they accumulate a build-up of grime and dirt.
Also known as a forming press, a wood press machine is a tool used in the manufacturing industry to deform a workpiece under high pressure. There are different types of wood machines presses, including press brakes, punch presses, shop presses and more. While the exact mechanics vary depending on the type of machine press, most machine presses work by pressing a plate or die onto or against a workpiece. Once the workpiece is positioned underneath the machine press’s plate or die, the tool setter activates the machine press. Using hydraulic pressure, the machine press pushes the plate or die against the surface of the workpiece, which causes the workpiece’s shape to deform.
Profile wrapping machine is specially used to coat PVC, PP film, lacquer paper, etc. on the surface of wood, bamboo decorative strips, aluminum, plastics and other materials. Using high-standard coating, it can cover various angles, arcs, concave and convex surfaces, pressure grooves, curling, etc. Suitable for building materials, furniture, desktops, doors and windows, decorative strips or related professional manufacturers. It can perfectly cover the surface of products with complex shapes.
The surface planer (sometimes known as a 'Jointer') is used for planing one side and one face of solid timber straight and square to each other. A surface planer is designed with two tables, an infeed table and an outfeed table with a cutterblock set between them. The basic setup of a surface planer includes a housing that encases a set of blades located in the middle and a couple of rollers in front and behind them. As a board is passed through the machine, the first set of rollers grabs it then passes it through the blades, which skims off material from the board.
Four sides moulder moulds the shape by cutting away the excess wood needed to reveal the profile. This process happens on all four sides of the board in one pass through the machine.
A dust collector, sometimes called a dust extractor, is an indispensable cleaning machine for any woodworking enthusiast. The dust collector is a tool that collects the wood byproducts produced by power tools. Whether these are wood chips, wood shavings, or dust, it keeps the area where you’re working clean. The dust is stored in a container or plastic bag until it’s emptied out.
Multi rip saw machine is a new designed woodsaw machine, cut to boards from log directly, which is widely used in woodbased panel. Machine type for edging, lengthwise cutting or long side grooving of planks, boards and panel material that is equipped with several saw blades or grooving tools mounted side by side on a sawing spindle.
A table panel saw is any type of sawing machine that cuts sheets into sized parts. Panel saws can be vertical or horizontal. Typically, vertical saws take up less floor space. Panel saws can have one main saw blade or a scoring along with the main saw blade. Scoring is used to create a groove, especially in double side laminate before the main saw rips the piece in two, to avoid chipping. The scoring saw rotates in an opposite direction, as the main saw to avoid chipping.
A wood sanding machine is a power tool used to smooth surfaces by abrasion with sandpaper. Sanders have the means to attach the sandpaper and a mechanism to move it rapidly contained within a housing with means to hand-hold it or fix it to a workbench. There are different types of wood sanding machines including belt sander, orbital sander, disc sander, polish sander, brush sander, electric sander or vibration sander.
Wire brush machine is an industrial strength crevice cleaner. It's ideal for the removal of debris and weeds from asphalt and concrete cracks. The wire brush is primarily an abrasive implement, used for cleaning rust and removing paint. It is also used to clean surfaces and to create a better conductive area for attaching electrical connections, such as those between car battery posts and their connectors, should they accumulate a build-up of grime and dirt.
Also known as a forming press, a wood press machine is a tool used in the manufacturing industry to deform a workpiece under high pressure. There are different types of wood machines presses, including press brakes, punch presses, shop presses and more. While the exact mechanics vary depending on the type of machine press, most machine presses work by pressing a plate or die onto or against a workpiece. Once the workpiece is positioned underneath the machine press’s plate or die, the tool setter activates the machine press. Using hydraulic pressure, the machine press pushes the plate or die against the surface of the workpiece, which causes the workpiece’s shape to deform.
Profile wrapping machine is specially used to coat PVC, PP film, lacquer paper, etc. on the surface of wood, bamboo decorative strips, aluminum, plastics and other materials. Using high-standard coating, it can cover various angles, arcs, concave and convex surfaces, pressure grooves, curling, etc. Suitable for building materials, furniture, desktops, doors and windows, decorative strips or related professional manufacturers. It can perfectly cover the surface of products with complex shapes.
The surface planer (sometimes known as a 'Jointer') is used for planing one side and one face of solid timber straight and square to each other. A surface planer is designed with two tables, an infeed table and an outfeed table with a cutterblock set between them. The basic setup of a surface planer includes a housing that encases a set of blades located in the middle and a couple of rollers in front and behind them. As a board is passed through the machine, the first set of rollers grabs it then passes it through the blades, which skims off material from the board.
Four sides moulder moulds the shape by cutting away the excess wood needed to reveal the profile. This process happens on all four sides of the board in one pass through the machine.
A dust collector, sometimes called a dust extractor, is an indispensable cleaning machine for any woodworking enthusiast. The dust collector is a tool that collects the wood byproducts produced by power tools. Whether these are wood chips, wood shavings, or dust, it keeps the area where you’re working clean. The dust is stored in a container or plastic bag until it’s emptied out.
Multi rip saw machine is a new designed woodsaw machine, cut to boards from log directly, which is widely used in woodbased panel. Machine type for edging, lengthwise cutting or long side grooving of planks, boards and panel material that is equipped with several saw blades or grooving tools mounted side by side on a sawing spindle.
