Portal
06-10-2022, 11:41 AM
Reviews : 0 • Reading : 898
#MatchMasters FREE 2 SPINS 👇
Grab a gift: 👇
👉 COLLECT 👈
![[Image: igbzV7I.jpg]](https://i.imgur.com/igbzV7I.jpg)
Grab a gift: 👇
👉 COLLECT 👈
06-10-2022, 04:55 AM
Reviews : 0 • Reading : 357
Copper braided wire is used for soft connecting wires of electrical devices, switch electrical, electric furnaces and batteries. The copper braided wire is made of high-quality round copper wire or tinned soft round copper wire braided by multiple strands in a single layer or multiple layers.
Tinned copper braid is a type of multiconductor cable that is a tight weave of soft drawn tinned copper wire. Tinned copper braid will give you more flexibility, because of its considerably lighter cable from an installation point of view. In addition, since the material has been made of copper, it allows the armored to be used as ground cable when it’s necessary.
Copper stranded wire is made of a quantity of thin (usually copper) strands that are twisted and bundled together and generally enclosed in a PVC material to form a multi-stranded conductor. Stranded wires are mainly used for indoor applications.
Copper flexible connectors provide a low resistance flex connector between two rigid bus bar sections that have dynamic motion. Flexible connectors are widely used in electrical distribution, switchgear industries because of excellent flexibility.
Bare copper wire is the most commonly used type of copper wire and is often referred to with the general term “grounding wire.” It does not have any sort of protective coating, however, the lack of insulation allows bare copper to have the best conductive properties. As a base, the wire contained within acts as a ground.
Silver bonding wires have been developed as a perfect combination of significant cost reduction compared to gold and required bonding features for sensitive devices. They achieve good reliability and excellent bondability. With a diameter up to a size of 0.6 mils / 15 microns they are suitable for fine structures with an ultra-fine pitch.
A wire harness, also commonly referred to as a wiring harness, is an exterior sheath used to cover some types of electronic wires. Generally, wiring harnesses are made of thermoplastic or thermoset materials that can help protect the cables from the environment.
High temperature wire is often defined as a wire with a temperature rating of 125°C or higher, although high-temperature can also refer to temperature ratings as low as 90°C. High-temperature cables can either be single-conductor or multiconductor.
Silicone rubber wire is a wire where silicone (a type of rubber) is used as the insulator around the wire. Silicone wire is well known for its flexibility and heat resistance and is highly recommended within extreme temperature environments. These wires usually have a temperature resistance up to + 250°C.
PVC wire is wire with an insulating jacket made from polyvinyl chloride, a soft plastic. It is usually used for low-voltage applications where the wire will be enclosed inside equipment or a raceway. It produces toxic gases when it burns and so is not run exposed in walls or ceilings.
Tinned copper braid is a type of multiconductor cable that is a tight weave of soft drawn tinned copper wire. Tinned copper braid will give you more flexibility, because of its considerably lighter cable from an installation point of view. In addition, since the material has been made of copper, it allows the armored to be used as ground cable when it’s necessary.
Copper stranded wire is made of a quantity of thin (usually copper) strands that are twisted and bundled together and generally enclosed in a PVC material to form a multi-stranded conductor. Stranded wires are mainly used for indoor applications.
Copper flexible connectors provide a low resistance flex connector between two rigid bus bar sections that have dynamic motion. Flexible connectors are widely used in electrical distribution, switchgear industries because of excellent flexibility.
Bare copper wire is the most commonly used type of copper wire and is often referred to with the general term “grounding wire.” It does not have any sort of protective coating, however, the lack of insulation allows bare copper to have the best conductive properties. As a base, the wire contained within acts as a ground.
Silver bonding wires have been developed as a perfect combination of significant cost reduction compared to gold and required bonding features for sensitive devices. They achieve good reliability and excellent bondability. With a diameter up to a size of 0.6 mils / 15 microns they are suitable for fine structures with an ultra-fine pitch.
A wire harness, also commonly referred to as a wiring harness, is an exterior sheath used to cover some types of electronic wires. Generally, wiring harnesses are made of thermoplastic or thermoset materials that can help protect the cables from the environment.
High temperature wire is often defined as a wire with a temperature rating of 125°C or higher, although high-temperature can also refer to temperature ratings as low as 90°C. High-temperature cables can either be single-conductor or multiconductor.
Silicone rubber wire is a wire where silicone (a type of rubber) is used as the insulator around the wire. Silicone wire is well known for its flexibility and heat resistance and is highly recommended within extreme temperature environments. These wires usually have a temperature resistance up to + 250°C.
PVC wire is wire with an insulating jacket made from polyvinyl chloride, a soft plastic. It is usually used for low-voltage applications where the wire will be enclosed inside equipment or a raceway. It produces toxic gases when it burns and so is not run exposed in walls or ceilings.
06-10-2022, 04:54 AM
Reviews : 0 • Reading : 402
A dining chair is part of a dining room furniture set. A set of dining room chairs, often six or more, is arranged around a dining room table. A dining chair is a small chair with a frame that is not upholstered. It has a solid frame and it may or may not have arms. The seat and back may or may not be upholstered.
Accent chairs are chairs that are placed strategically in a room to provide additional seating. There are two approaches to making use of an accent chair. One approach is to place the chair in a position that complements or accents the colors and textures of larger pieces, such as a sofa. A second approach to the use of this type of chair is to create a secondary seating area within the room.
Ergonomic accent chair is brimming with mid-century flair. This chair accents a modern living room setup and creates a comforting retreat - as the name suggests. Its inviting curved contours, organic shapes, soft padded upholstery and a footstool supports countless seating positions.
A swivel accent chair is one in which may rotate the seat about a central point to face in a new direction without moving the legs. Swivel chairs with wheels on the base allow users to move the chair around their workspace without getting up. This style is commonly found in modern offices and is also known as office chairs.
Barstools are a type of tall stool, often with a foot rest to support the feet. The height and narrowness of bar stools makes them suitable for use at bars and high tables in pubs or bars. There are many different types, construction materials and models. Bar stools are often made of wood or metal. There are bar stools with and without armrests, backs, and padding or upholstery on the seat surface. Bar stools can range from basic wooden designs to more complex ones with adjustable height. Extra tall and extra short are common features, as well as indoor bar stools and outdoor bar stools. Some bar stools have backs, while most do not.
Leather barstool uses a good stool fabric, leather. The material is hard to rip, tear, or put holes into it. Also, it is easy to clean and can resist stains. An leather bar stool is a protean seating option that can add some color and character to any living space or commercial establishment. It looks classy, is comfortable and can also be your go-to seating for impromptu meal preps on the kitchen island.
Fabric barstool has backs. And when sitting on it, you fell comfortable, warm and soft. Also, it is decorative, easy to clean, resists stains, and is hard to tear or rip. Plus, it is also waterproof.
Metal frame barstool is made of quality metal with classic textured melamine veneer. The mixed materials combine the notably rustic with modern style. Barstool is ideal for a kitchen eating area, living room, party room, country pub, or basement bar. It's easy to match for most themes. This bar stool is rustic in feel with modern appeal with a wrap-around foot rest for comfort.
An ottoman is a form of couch that usually has a head but no back, although sometimes it has neither. It may have square or semicircular ends, and as a rule it is what upholsterers call "overstuffed", meaning no wood is visible. It may be used as a stool, footstool or as an alternative to a sofa. Ottomans are often sold as coordinating furniture with armchairs or gliders.
A bench (furniture) is a type of chair that commonly can hold 1-5 people at one time although a bench can be made to support more people if the area has the demand. Most benches are in public areas such as: Parks, Airports, Subways, and on large city roads.
Accent chairs are chairs that are placed strategically in a room to provide additional seating. There are two approaches to making use of an accent chair. One approach is to place the chair in a position that complements or accents the colors and textures of larger pieces, such as a sofa. A second approach to the use of this type of chair is to create a secondary seating area within the room.
Ergonomic accent chair is brimming with mid-century flair. This chair accents a modern living room setup and creates a comforting retreat - as the name suggests. Its inviting curved contours, organic shapes, soft padded upholstery and a footstool supports countless seating positions.
A swivel accent chair is one in which may rotate the seat about a central point to face in a new direction without moving the legs. Swivel chairs with wheels on the base allow users to move the chair around their workspace without getting up. This style is commonly found in modern offices and is also known as office chairs.
Barstools are a type of tall stool, often with a foot rest to support the feet. The height and narrowness of bar stools makes them suitable for use at bars and high tables in pubs or bars. There are many different types, construction materials and models. Bar stools are often made of wood or metal. There are bar stools with and without armrests, backs, and padding or upholstery on the seat surface. Bar stools can range from basic wooden designs to more complex ones with adjustable height. Extra tall and extra short are common features, as well as indoor bar stools and outdoor bar stools. Some bar stools have backs, while most do not.
Leather barstool uses a good stool fabric, leather. The material is hard to rip, tear, or put holes into it. Also, it is easy to clean and can resist stains. An leather bar stool is a protean seating option that can add some color and character to any living space or commercial establishment. It looks classy, is comfortable and can also be your go-to seating for impromptu meal preps on the kitchen island.
Fabric barstool has backs. And when sitting on it, you fell comfortable, warm and soft. Also, it is decorative, easy to clean, resists stains, and is hard to tear or rip. Plus, it is also waterproof.
Metal frame barstool is made of quality metal with classic textured melamine veneer. The mixed materials combine the notably rustic with modern style. Barstool is ideal for a kitchen eating area, living room, party room, country pub, or basement bar. It's easy to match for most themes. This bar stool is rustic in feel with modern appeal with a wrap-around foot rest for comfort.
An ottoman is a form of couch that usually has a head but no back, although sometimes it has neither. It may have square or semicircular ends, and as a rule it is what upholsterers call "overstuffed", meaning no wood is visible. It may be used as a stool, footstool or as an alternative to a sofa. Ottomans are often sold as coordinating furniture with armchairs or gliders.
A bench (furniture) is a type of chair that commonly can hold 1-5 people at one time although a bench can be made to support more people if the area has the demand. Most benches are in public areas such as: Parks, Airports, Subways, and on large city roads.
06-10-2022, 04:52 AM
Reviews : 0 • Reading : 338
Drills bits are cutting tools used to remove material to create holes, almost always of circular cross-section. Drills come in many sizes and shapes and can create different kinds of holes in many different materials. In order to create holes drill bits are usually attached to a drill, which powers them to cut through the workpiece, typically by rotation. The drill will grasp the upper end of a bit called the shank in the chuck.
SDS plus drill bits are used for drilling into hard materials such as brick and concrete with minimal effort. The SDS part refers to the shank type, which has two sets of grooves that snap into the chuck making it more secure and allowing the bit to slide up and down giving you the hammer action.These bits are interchangeable with SDS drill bits and are available in a variety of sizes. As they are thinner, they are ideal for smaller holes.
SDS max drill bit is intended to drill larger holes and work in more extreme conditions. It is a drill bit that offers higher speed and drills with more power. It is therefore ideal for drilling on hard surfaces and for drilling larger holes.These bits have three open grooves, with a locking segment attached to the grooves rather than locking balls. They are made for bigger hammer drills and make bigger holes. SDS Max chisels are also available that can be used for chipping, digging, chiselling, and other heavy-duty work.
Square drill bits are also called mortise bits, and the best ones fit universally in most mortising machines and drill presses that have hammering functions.
An SDS hex drill bit is, as its name suggests, a bit designed to be used with an SDS rotary hammer drill. The dual action of rotation coupled with proper hammering makes chiseling and drilling through hard materials much easier than with a standard drill bit. An SDS bit is quite different than a standard bit and is composed of five parts.
A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.The handle and blade of some types of chisel are made of metal or of wood with a sharp edge in it.
SDS plus chisel delivers clean and fast removal of wall and floor tiles. Self-sharpening spade body retains uniform thickness throughout its lifetime for consistently high removal rates. Angled cutting edge and self-sharpening design are for a long life and a 30%-higher material removal rate.
SDS max chisels are made from high grade, forged steel, providing up to 20% longer life. These chisels are specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. Hole saws typically have a pilot drill bit (arbor) at their center to keep the saw teeth from walking. The fact that a hole saw creates the hole without needing to cut up the core often makes it preferable to twist drills or spade drills for relatively large holes (especially those larger than 25 millimetres (1.0 inch)). The same hole can be made faster and using less power.
A glass drill bit is typically used with an electric drill to create holes in glass. It may also be used for tile, ceramics and similar materials. The bit is coated with diamond pieces that act like sandpaper to rub holes in the material being drilled without cracking or breakage. The glass bit is smooth, straight and has a rough texture.The glass drill bit doesn’t have any flutes, because when a hole is drilled in glass the excess material is fine enough that it turns to dust rather than shavings that must be removed from the hole.
SDS plus drill bits are used for drilling into hard materials such as brick and concrete with minimal effort. The SDS part refers to the shank type, which has two sets of grooves that snap into the chuck making it more secure and allowing the bit to slide up and down giving you the hammer action.These bits are interchangeable with SDS drill bits and are available in a variety of sizes. As they are thinner, they are ideal for smaller holes.
SDS max drill bit is intended to drill larger holes and work in more extreme conditions. It is a drill bit that offers higher speed and drills with more power. It is therefore ideal for drilling on hard surfaces and for drilling larger holes.These bits have three open grooves, with a locking segment attached to the grooves rather than locking balls. They are made for bigger hammer drills and make bigger holes. SDS Max chisels are also available that can be used for chipping, digging, chiselling, and other heavy-duty work.
Square drill bits are also called mortise bits, and the best ones fit universally in most mortising machines and drill presses that have hammering functions.
An SDS hex drill bit is, as its name suggests, a bit designed to be used with an SDS rotary hammer drill. The dual action of rotation coupled with proper hammering makes chiseling and drilling through hard materials much easier than with a standard drill bit. An SDS bit is quite different than a standard bit and is composed of five parts.
A chisel is a tool with a characteristically shaped cutting edge (such that wood chisels have lent part of their name to a particular grind) of blade on its end, for carving or cutting a hard material such as wood, stone, or metal by hand, struck with a mallet, or mechanical power.The handle and blade of some types of chisel are made of metal or of wood with a sharp edge in it.
SDS plus chisel delivers clean and fast removal of wall and floor tiles. Self-sharpening spade body retains uniform thickness throughout its lifetime for consistently high removal rates. Angled cutting edge and self-sharpening design are for a long life and a 30%-higher material removal rate.
SDS max chisels are made from high grade, forged steel, providing up to 20% longer life. These chisels are specifically designed for SDS-Max rotary hammers and should be used in hammer only mode.
A hole saw (also styled holesaw), also known as a hole cutter, is a saw blade of annular (ring) shape, whose annular kerf creates a hole in the workpiece without having to cut up the core material. It is used in a drill. Hole saws typically have a pilot drill bit (arbor) at their center to keep the saw teeth from walking. The fact that a hole saw creates the hole without needing to cut up the core often makes it preferable to twist drills or spade drills for relatively large holes (especially those larger than 25 millimetres (1.0 inch)). The same hole can be made faster and using less power.
A glass drill bit is typically used with an electric drill to create holes in glass. It may also be used for tile, ceramics and similar materials. The bit is coated with diamond pieces that act like sandpaper to rub holes in the material being drilled without cracking or breakage. The glass bit is smooth, straight and has a rough texture.The glass drill bit doesn’t have any flutes, because when a hole is drilled in glass the excess material is fine enough that it turns to dust rather than shavings that must be removed from the hole.
06-10-2022, 04:51 AM
Reviews : 0 • Reading : 397
A wood cutting machine is equipment used to change the size and shape of semifinished wood goods and parts by manually or mechanically cutting the wood and removing the shavings (lathes). Many woodcutting machine tools can cut at speeds of up to 60–100 m/sec and feed at rates of 100–180 m/min. The most common types are saws, shapers, and drills.
A table panel saw is any type of sawing machine that cuts sheets into sized parts. Panel saws can be vertical or horizontal. Typically, vertical saws take up less floor space. Panel saws can have one main saw blade or a scoring along with the main saw blade. Scoring is used to create a groove, especially in double side laminate before the main saw rips the piece in two, to avoid chipping. The scoring saw rotates in an opposite direction, as the main saw to avoid chipping.
A wood sanding machine is a power tool used to smooth surfaces by abrasion with sandpaper. Sanders have the means to attach the sandpaper and a mechanism to move it rapidly contained within a housing with means to hand-hold it or fix it to a workbench. There are different types of wood sanding machines including belt sander, orbital sander, disc sander, polish sander, brush sander, electric sander or vibration sander.
Wire brush machine is an industrial strength crevice cleaner. It's ideal for the removal of debris and weeds from asphalt and concrete cracks. The wire brush is primarily an abrasive implement, used for cleaning rust and removing paint. It is also used to clean surfaces and to create a better conductive area for attaching electrical connections, such as those between car battery posts and their connectors, should they accumulate a build-up of grime and dirt.
Also known as a forming press, a wood press machine is a tool used in the manufacturing industry to deform a workpiece under high pressure. There are different types of wood machines presses, including press brakes, punch presses, shop presses and more. While the exact mechanics vary depending on the type of machine press, most machine presses work by pressing a plate or die onto or against a workpiece. Once the workpiece is positioned underneath the machine press’s plate or die, the tool setter activates the machine press. Using hydraulic pressure, the machine press pushes the plate or die against the surface of the workpiece, which causes the workpiece’s shape to deform.
Profile wrapping machine is specially used to coat PVC, PP film, lacquer paper, etc. on the surface of wood, bamboo decorative strips, aluminum, plastics and other materials. Using high-standard coating, it can cover various angles, arcs, concave and convex surfaces, pressure grooves, curling, etc. Suitable for building materials, furniture, desktops, doors and windows, decorative strips or related professional manufacturers. It can perfectly cover the surface of products with complex shapes.
The surface planer (sometimes known as a 'Jointer') is used for planing one side and one face of solid timber straight and square to each other. A surface planer is designed with two tables, an infeed table and an outfeed table with a cutterblock set between them. The basic setup of a surface planer includes a housing that encases a set of blades located in the middle and a couple of rollers in front and behind them. As a board is passed through the machine, the first set of rollers grabs it then passes it through the blades, which skims off material from the board.
Four sides moulder moulds the shape by cutting away the excess wood needed to reveal the profile. This process happens on all four sides of the board in one pass through the machine.
A dust collector, sometimes called a dust extractor, is an indispensable cleaning machine for any woodworking enthusiast. The dust collector is a tool that collects the wood byproducts produced by power tools. Whether these are wood chips, wood shavings, or dust, it keeps the area where you’re working clean. The dust is stored in a container or plastic bag until it’s emptied out.
Multi rip saw machine is a new designed woodsaw machine, cut to boards from log directly, which is widely used in woodbased panel. Machine type for edging, lengthwise cutting or long side grooving of planks, boards and panel material that is equipped with several saw blades or grooving tools mounted side by side on a sawing spindle.
A table panel saw is any type of sawing machine that cuts sheets into sized parts. Panel saws can be vertical or horizontal. Typically, vertical saws take up less floor space. Panel saws can have one main saw blade or a scoring along with the main saw blade. Scoring is used to create a groove, especially in double side laminate before the main saw rips the piece in two, to avoid chipping. The scoring saw rotates in an opposite direction, as the main saw to avoid chipping.
A wood sanding machine is a power tool used to smooth surfaces by abrasion with sandpaper. Sanders have the means to attach the sandpaper and a mechanism to move it rapidly contained within a housing with means to hand-hold it or fix it to a workbench. There are different types of wood sanding machines including belt sander, orbital sander, disc sander, polish sander, brush sander, electric sander or vibration sander.
Wire brush machine is an industrial strength crevice cleaner. It's ideal for the removal of debris and weeds from asphalt and concrete cracks. The wire brush is primarily an abrasive implement, used for cleaning rust and removing paint. It is also used to clean surfaces and to create a better conductive area for attaching electrical connections, such as those between car battery posts and their connectors, should they accumulate a build-up of grime and dirt.
Also known as a forming press, a wood press machine is a tool used in the manufacturing industry to deform a workpiece under high pressure. There are different types of wood machines presses, including press brakes, punch presses, shop presses and more. While the exact mechanics vary depending on the type of machine press, most machine presses work by pressing a plate or die onto or against a workpiece. Once the workpiece is positioned underneath the machine press’s plate or die, the tool setter activates the machine press. Using hydraulic pressure, the machine press pushes the plate or die against the surface of the workpiece, which causes the workpiece’s shape to deform.
Profile wrapping machine is specially used to coat PVC, PP film, lacquer paper, etc. on the surface of wood, bamboo decorative strips, aluminum, plastics and other materials. Using high-standard coating, it can cover various angles, arcs, concave and convex surfaces, pressure grooves, curling, etc. Suitable for building materials, furniture, desktops, doors and windows, decorative strips or related professional manufacturers. It can perfectly cover the surface of products with complex shapes.
The surface planer (sometimes known as a 'Jointer') is used for planing one side and one face of solid timber straight and square to each other. A surface planer is designed with two tables, an infeed table and an outfeed table with a cutterblock set between them. The basic setup of a surface planer includes a housing that encases a set of blades located in the middle and a couple of rollers in front and behind them. As a board is passed through the machine, the first set of rollers grabs it then passes it through the blades, which skims off material from the board.
Four sides moulder moulds the shape by cutting away the excess wood needed to reveal the profile. This process happens on all four sides of the board in one pass through the machine.
A dust collector, sometimes called a dust extractor, is an indispensable cleaning machine for any woodworking enthusiast. The dust collector is a tool that collects the wood byproducts produced by power tools. Whether these are wood chips, wood shavings, or dust, it keeps the area where you’re working clean. The dust is stored in a container or plastic bag until it’s emptied out.
Multi rip saw machine is a new designed woodsaw machine, cut to boards from log directly, which is widely used in woodbased panel. Machine type for edging, lengthwise cutting or long side grooving of planks, boards and panel material that is equipped with several saw blades or grooving tools mounted side by side on a sawing spindle.
06-10-2022, 04:50 AM
Reviews : 0 • Reading : 345
Wet konjac noodles were made from nature soluble fiber - Konjac glucomannan (KGM) and water, is a very low carb and very low glycemic nature food, which contain about 96% water and 4% soluble fiber. They can be made in many different styles and shapes. Konjac wet noodles are traditional Japanese foods called shirataki noodles or konnyaku. They are translucent and gelatinous, have no discernable taste but absorb the dominant flavors of the soup or dish to which they're added. These noodles have no flavors but absorb any they're with. They are white in color, almost transparent and gelatinous, and package in water-filled plastic bags. And these noodles consist primarily of a glucomannan soluble fiber and are very low glycemic, and therefore especially good for people with diabetes.
Made from the corm of the konjac yam, also dubbed the elephant yam, konjac pasta has been a staple in Japanese and Chinese diets for centuries. The other common name for the konjac pasta is shirataki pasta. It means "white waterfall" in Japanese, a moniker given because the pasta looks translucent and almost like cascading water when poured into a bowl. This almost clear pasta doesn't have much taste. What the food lacks in flavor, it makes up for being a filling ingredient. The konjac pasta also doesn't have much flavor on its own, instead, it takes on the nuances of sauces, main ingredients, and spices. It can be used for Asian-inspired noodle dishes, to make a main, served cold and in a salad, or simply mixed with a savory peanut sauce for a quick side plate.
Sauce konjac noodles make up for the plain flavor of the konjac noodles. Sauce konjac noodles are not only delicious but also preserve the health benefits of the konjac such as losing weight, lowering insulin and blood sugar levels, reducing bad cholesterol levels, relieving constipation, and improving gut health. There are different flavors of these noodles including spicy, sweet, salty, and so on.
Unlike rice, konjac rice is made from a root vegetable called konjac root. Also sometimes referred to as konnyaku potato and devil’s tongue, konjac root is native to various counties in eastern Asia. Konjac rice boasts many benefits with low calories, low carbohydrates, and without fat, sugar, and starch. Therefore, it can reduce weight, optimize digestion, control blood sugar, and lower heart disease risk.
Dried konjac noodles are noodles without water packed in a bag. Thus, it can be carried conveniently. Dried noodles are designed to be cooked or soaked in boiling water before eating. Common ingredients in the flavoring powder are salt, monosodium glutamate, seasoning, and sugar. What's more, they can lower blood sugar and cholesterol levels, improve skin and gut health, help heal wounds, and promote weight loss.
Made from the corm of the konjac yam, also dubbed the elephant yam, konjac pasta has been a staple in Japanese and Chinese diets for centuries. The other common name for the konjac pasta is shirataki pasta. It means "white waterfall" in Japanese, a moniker given because the pasta looks translucent and almost like cascading water when poured into a bowl. This almost clear pasta doesn't have much taste. What the food lacks in flavor, it makes up for being a filling ingredient. The konjac pasta also doesn't have much flavor on its own, instead, it takes on the nuances of sauces, main ingredients, and spices. It can be used for Asian-inspired noodle dishes, to make a main, served cold and in a salad, or simply mixed with a savory peanut sauce for a quick side plate.
Sauce konjac noodles make up for the plain flavor of the konjac noodles. Sauce konjac noodles are not only delicious but also preserve the health benefits of the konjac such as losing weight, lowering insulin and blood sugar levels, reducing bad cholesterol levels, relieving constipation, and improving gut health. There are different flavors of these noodles including spicy, sweet, salty, and so on.
Unlike rice, konjac rice is made from a root vegetable called konjac root. Also sometimes referred to as konnyaku potato and devil’s tongue, konjac root is native to various counties in eastern Asia. Konjac rice boasts many benefits with low calories, low carbohydrates, and without fat, sugar, and starch. Therefore, it can reduce weight, optimize digestion, control blood sugar, and lower heart disease risk.
Dried konjac noodles are noodles without water packed in a bag. Thus, it can be carried conveniently. Dried noodles are designed to be cooked or soaked in boiling water before eating. Common ingredients in the flavoring powder are salt, monosodium glutamate, seasoning, and sugar. What's more, they can lower blood sugar and cholesterol levels, improve skin and gut health, help heal wounds, and promote weight loss.
06-10-2022, 04:49 AM
Reviews : 0 • Reading : 374
Food and feed additives are substances that are added to food to maintain or improve the safety, freshness, taste, texture, or appearance of food or feed. Some food additives have been in use for centuries for preservation – such as salt (in meats such as bacon or dried fish), sugar (in marmalade), or sulfur dioxide (in wine). Food additives can be derived from plants, animals, or minerals, or they can be synthetic. They are added intentionally to food to perform certain technological purposes which consumers often take for granted. Feed additives are products used in animal nutrition to achieve an effect on the feed itself, on the animals, on food products obtained from the animals consuming the feed additive, or on the environment. For instance, feed additives are used to enhance flavor of feed, meet the need for certain nutrients or increase the performance of animals in good health. They are used in feed for food-producing animals and in pet food. Feed additives include technological additives, sensory additives, nutritional additives, zootechnical additives, coccidiostats, and histomonostats.
The organic chemical raw materials are petrochemicals made of petroleum and natural gas, and the industries of various organic chemical products are produced or fractionated by the raw material gas after coal gasification and the coal tar recovered by dry distillation. The direct raw materials used in basic organic chemicals mainly include hydrogen, carbon monoxide, aliphatic hydrocarbons (methane, ethylene, acetylene, propylene, aliphatic hydrocarbons above C4), aromatic hydrocarbons (benzene, toluene, xylene, ethylbenzene). Organic raw materials are widely used and can be divided into three aspects: one is the raw material used to produce polymer chemical products, that is, the monomer for polymerization; the other is used in other organic chemical industries, including raw materials for fine chemical products; Used in solvents, refrigerants, antifreeze, gas adsorbents, etc. Basic organic chemicals are the basis for the development of various organic chemical products and are a major component of modern industrial structures.
The organic chemical raw materials are petrochemicals made of petroleum and natural gas, and the industries of various organic chemical products are produced or fractionated by the raw material gas after coal gasification and the coal tar recovered by dry distillation. The direct raw materials used in basic organic chemicals mainly include hydrogen, carbon monoxide, aliphatic hydrocarbons (methane, ethylene, acetylene, propylene, aliphatic hydrocarbons above C4), aromatic hydrocarbons (benzene, toluene, xylene, ethylbenzene). Organic raw materials are widely used and can be divided into three aspects: one is the raw material used to produce polymer chemical products, that is, the monomer for polymerization; the other is used in other organic chemical industries, including raw materials for fine chemical products; Used in solvents, refrigerants, antifreeze, gas adsorbents, etc. Basic organic chemicals are the basis for the development of various organic chemical products and are a major component of modern industrial structures.
06-10-2022, 04:47 AM
Reviews : 0 • Reading : 431
A toilet is a piece of sanitary hardware that collects human urine and feces, and sometimes toilet paper, usually for disposal. Flush toilets use water, while dry or non-flush toilets do not. They can be designed for a sitting position popular in Europe and North America with a toilet seat, with additional considerations for those with disabilities, or for a squatting posture more popular in Asia (see squat toilet). In urban areas, flush toilets are usually connected to a sewer system that leads to septic tanks in isolated areas. The waste is known as blackwater and the combined effluent including other sources is sewage. Dry toilets are connected to a pit, removable container, composting chamber, or other storage and treatment device, including urine diversion with a urine-diverting toilet.
An Smart Toilet is a bathroom plumbing fixture or type of electronic bidet toilet which incorporates traditional bidet cleansing (for genital, buttocks and anus hygiene), with the added enhancement of modern SMART home technology.
A wall hung toilet is a system in which the toilet bowl is mounted directly to the wall, while its tank is installed inside the wall. This allows wall hung toilets to take up less space. Having the tank behind the wall gives a more modern look since the working parts are hidden.
The Wall Mounted Cabinet is a unit that can be installed on the wall, suspended from the floor, and that allows you to furnish the living area with models that range from classic solutions to modern proposals.
A floor mounted vanity is mounted on the floor. If your plumbing is already positioned, this type of vanity can conceal it very effectively. A modern floor mounted vanity can deliver excellent looks and practical amenities.
Outdoor toilets are referred to by many terms throughout the English-speaking world. The term "outhouse" is used in North American English for the structure over a toilet, usually a pit latrine ("long drop"). However, in British English "outhouse" means any outbuilding, such as a shed or barn.
A bathroom mirror can also play its part in making your bathroom appear larger by reflecting the light and space around. This forms an optical illusion of extending your bathroom and provides more natural light, thereby making the space look bigger.
A bathroom cabinet is a cabinet in a bathroom, most often used to store hygiene products, toiletries, and sometimes also medications such that it works as an improvised medicine cabinet. Bathroom cabinets are usually placed under sinks, over sinks, or above toilets. Many mirror cabinets are combined with a lamp that illuminates the mirror and thereby (especially in small bathrooms) also the room. Bathroom cabinets often either have an integrated electrical socket or are placed close to one so that appliances such as an electric shaver or hairdryer can be used. Bathroom cabinets have become much more technologically advanced with retailers today offering features like Bluetooth audio, mood lighting, and anti-fog technology.
In addition to the above products, we also provide ordinary toilets for customers to choose from.
An Smart Toilet is a bathroom plumbing fixture or type of electronic bidet toilet which incorporates traditional bidet cleansing (for genital, buttocks and anus hygiene), with the added enhancement of modern SMART home technology.
A wall hung toilet is a system in which the toilet bowl is mounted directly to the wall, while its tank is installed inside the wall. This allows wall hung toilets to take up less space. Having the tank behind the wall gives a more modern look since the working parts are hidden.
The Wall Mounted Cabinet is a unit that can be installed on the wall, suspended from the floor, and that allows you to furnish the living area with models that range from classic solutions to modern proposals.
A floor mounted vanity is mounted on the floor. If your plumbing is already positioned, this type of vanity can conceal it very effectively. A modern floor mounted vanity can deliver excellent looks and practical amenities.
Outdoor toilets are referred to by many terms throughout the English-speaking world. The term "outhouse" is used in North American English for the structure over a toilet, usually a pit latrine ("long drop"). However, in British English "outhouse" means any outbuilding, such as a shed or barn.
A bathroom mirror can also play its part in making your bathroom appear larger by reflecting the light and space around. This forms an optical illusion of extending your bathroom and provides more natural light, thereby making the space look bigger.
A bathroom cabinet is a cabinet in a bathroom, most often used to store hygiene products, toiletries, and sometimes also medications such that it works as an improvised medicine cabinet. Bathroom cabinets are usually placed under sinks, over sinks, or above toilets. Many mirror cabinets are combined with a lamp that illuminates the mirror and thereby (especially in small bathrooms) also the room. Bathroom cabinets often either have an integrated electrical socket or are placed close to one so that appliances such as an electric shaver or hairdryer can be used. Bathroom cabinets have become much more technologically advanced with retailers today offering features like Bluetooth audio, mood lighting, and anti-fog technology.
In addition to the above products, we also provide ordinary toilets for customers to choose from.
06-10-2022, 04:46 AM
Reviews : 0 • Reading : 556
A pair of safety shoes (also known as safety boots) is personal protective equipment (PPE) for foot protection at workplaces. It prevents from getting foot injuries due to slippery surface, heavy falling or rolling objects, sharp piercing edges, pinch points, rotary machinery, hot objects, loops of ropes under tension, splinters, electricity, chemicals or even bad weather etc.
Rain boots are designed to prevent feet from getting wet. Rain boots are useful for more than a rainy day. Snow, mud, and chemical waste all require waterproof boots for protection, dryness, and warmth. Many boots are made with inner liners of flannel or other warm materials for use in cold weather. The rain boots always combine fashion variety with the traditional style.
A safety glove is a piece of personal protection equipment, or PPE, worn by workers to protect their hands from injuries at the workplace. Some of these gloves provide protection from amputations, abrasions, cuts, bruises, friction blisters, splinters, burns, chemicals, and disease. There are many types of safety gloves, including durable work gloves, fabric and coated fabric gloves, liquid and chemical resistant gloves and insulated rubber gloves.
Riding gloves are an essential piece of your riding outfit. They protect your hands from friction against the reins or lunge line and from the elements. Riding gloves are designed specifically to aid riders and often have reinforced areas for durability where reins come in contact with the gloves.
Safety glasses are a part of Personal Protective Equipment that are worn by the workers around their eyes for protection. Safety glasses act as a shield to protect the eyes from any type of foreign debris that may cause irritation or injury. Safety glasses can be used by anyone. Depending on the requirement of the user, safety glasses can have varied lenses such as clear, bifocal, anti-fog, tinted, indoor/outdoor lens, polarized, shooting, men’s or women's, low light eyewear, filtered and changeable. All safety glasses shield the eyes from hazards. Such hazards may arise from flying solid debris, liquid chemical splashes, impact from moving machinery, heat, sparks and intense lights during welding and metal cutting, etc.
Work and welding goggles provide a degree of eye protection while some forms of welding and cutting are being done. They are intended to protect the eyes not only from the heat and optical radiation produced by the welding, such as the intense ultraviolet light produced by an electric arc, but also from sparks or debris.
A night-vision device (NVD), also known as night optical/observation device (NOD) and night vision goggles (NVG), is an optoelectronic device that allows images to be produced in levels of light approaching total darkness. The image may be a conversion to visible light of both visible light and near-infrared, while by convention detection of thermal infrared is denoted thermal imaging. The image produced is typically monochrome green, because it was considered to be the easiest color to look at for prolonged periods in the dark. NVDs are most often used by the military and law enforcement agencies, but are available to civilian users.
Safety masks are made to contain droplets and particles you breathe, cough, or sneeze out. If they fit closely to the face, they can also provide you some protection from particles spread by others. Masks and respirators (i.e., specialized filtering masks such as “N95s”) can provide different levels of protection depending on the type of mask and how they are used. Loosely woven cloth products provide the least protection, layered finely woven products offer more protection, well-fitting disposable surgical masks and KN95s offer even more protection, and well-fitting NIOSH-approved respirators (including N95s) offer the highest level of protection.
Disposable masks are usually made from paper or non-woven fabrics. Some masks are made of polypropylene, which is plastic. To make sure that your masks are hypoallergenic, opt for an option made with a material that’s 100% latex-free to avoid any possible irritation.
Safety helmet are designed to protect the head against falling objects and the side of the head, eyes, and neck from any untoward impacts, bumps, scrapes, and electrical exposure, etc. Wearing a safety helmet is a mandatory requirement that should be followed by all employers who should provide their workers with hard hats/safety helmet and fully ensure that they wear them.
Rain boots are designed to prevent feet from getting wet. Rain boots are useful for more than a rainy day. Snow, mud, and chemical waste all require waterproof boots for protection, dryness, and warmth. Many boots are made with inner liners of flannel or other warm materials for use in cold weather. The rain boots always combine fashion variety with the traditional style.
A safety glove is a piece of personal protection equipment, or PPE, worn by workers to protect their hands from injuries at the workplace. Some of these gloves provide protection from amputations, abrasions, cuts, bruises, friction blisters, splinters, burns, chemicals, and disease. There are many types of safety gloves, including durable work gloves, fabric and coated fabric gloves, liquid and chemical resistant gloves and insulated rubber gloves.
Riding gloves are an essential piece of your riding outfit. They protect your hands from friction against the reins or lunge line and from the elements. Riding gloves are designed specifically to aid riders and often have reinforced areas for durability where reins come in contact with the gloves.
Safety glasses are a part of Personal Protective Equipment that are worn by the workers around their eyes for protection. Safety glasses act as a shield to protect the eyes from any type of foreign debris that may cause irritation or injury. Safety glasses can be used by anyone. Depending on the requirement of the user, safety glasses can have varied lenses such as clear, bifocal, anti-fog, tinted, indoor/outdoor lens, polarized, shooting, men’s or women's, low light eyewear, filtered and changeable. All safety glasses shield the eyes from hazards. Such hazards may arise from flying solid debris, liquid chemical splashes, impact from moving machinery, heat, sparks and intense lights during welding and metal cutting, etc.
Work and welding goggles provide a degree of eye protection while some forms of welding and cutting are being done. They are intended to protect the eyes not only from the heat and optical radiation produced by the welding, such as the intense ultraviolet light produced by an electric arc, but also from sparks or debris.
A night-vision device (NVD), also known as night optical/observation device (NOD) and night vision goggles (NVG), is an optoelectronic device that allows images to be produced in levels of light approaching total darkness. The image may be a conversion to visible light of both visible light and near-infrared, while by convention detection of thermal infrared is denoted thermal imaging. The image produced is typically monochrome green, because it was considered to be the easiest color to look at for prolonged periods in the dark. NVDs are most often used by the military and law enforcement agencies, but are available to civilian users.
Safety masks are made to contain droplets and particles you breathe, cough, or sneeze out. If they fit closely to the face, they can also provide you some protection from particles spread by others. Masks and respirators (i.e., specialized filtering masks such as “N95s”) can provide different levels of protection depending on the type of mask and how they are used. Loosely woven cloth products provide the least protection, layered finely woven products offer more protection, well-fitting disposable surgical masks and KN95s offer even more protection, and well-fitting NIOSH-approved respirators (including N95s) offer the highest level of protection.
Disposable masks are usually made from paper or non-woven fabrics. Some masks are made of polypropylene, which is plastic. To make sure that your masks are hypoallergenic, opt for an option made with a material that’s 100% latex-free to avoid any possible irritation.
Safety helmet are designed to protect the head against falling objects and the side of the head, eyes, and neck from any untoward impacts, bumps, scrapes, and electrical exposure, etc. Wearing a safety helmet is a mandatory requirement that should be followed by all employers who should provide their workers with hard hats/safety helmet and fully ensure that they wear them.
06-10-2022, 04:43 AM
Reviews : 1 • Reading : 383
Green tea is made from the Camellia sinensis plant. Its dried leaves and leaf buds are used to make several teas, including black and oolong teas. Green tea is prepared by steaming and pan-frying the Camellia sinensis leaves and then drying them. Green tea is not fermented, so it's able to maintain necessary molecules called polyphenols, which seem to be responsible for many of its benefits. It also contains caffeine. Drinking green tea is linked to a reduced risk of clogged arteries. Drinking green tea might reduce the risk of developing high blood pressure. It might also slightly lower blood pressure in people with high blood pressure.
One of the most classical Chinese green teas, Chunmee tea is a tea every tea lover has to try at least once. It offers a good perspective on a wide range of green tea flavors, may offer numerous benefits, and tastes great, both hot and cold. It’s produced only in China, mostly in Anhui and Jiangxi Province. The English name of this tea is "Precious Eyebrows tea" because of the small hand-rolled leaves shaped in the form that resembles eyebrows. Chunmee is produced in China and is one of the most popular green teas in western countries. Chunmee is a pan-fired tea. Pan-fired teas have a less vegetal and nuttier flavor, that can be light or more intense, depending on how the teas were made.
Gunpowder tea is loose-leaf tea that is tightly rolled into tiny pellets that resemble gunpowder. This type of tea is usually produced using green tea leaves, but not always. The benefits of gunpowder tea depend on the type of tea leaf that is used to produce it. Gunpowder tea has a unique production method. To make the highest quality gunpowder tea, artisans wither, steam, roll, and dry individual tea leaves. This tea is sometimes called pearl tea or bead tea based on the shape of each tiny tea pellet. Some people also call it Chinese gunpowder tea.
A tea bag (or "teabag") is generally agreed to be a small, porous bag used to steep tea. These bags may be sealed and filled with tea leaves, or they may be open and empty (thus allowing the tea brewer/drinker to fill it with whole-leaf tea). Many tea bags have a string attached to make removing them from the brewing vessel easier, however, this is not true for all tea bags. Generally, tea bags with a string attached also bear the name of their producer or the type of tea on a small piece of paper at the opposite end of the string from the tea bag itself.
The famous tea in the 21st century includes Xi Hu Long Jing, Jiangsu Bi Luo Chun, Huang Shan Mao Feng, Liu An Gua Pian, Fujian Bai Hao Yin Zhen, Qimen Hong Cha, Du Yu Mao Jian, Xin Yang Mao Jian, Wuyi Yan Cha, Fujian Tie Guan Yin. Most of them have a singular shape, flavor, and aroma, easily discerned from other styles, and are developed from a particular local variety of tea bush that has acquired strong and widespread appeal.
Flower tea is a mixture of tea and tisanes. In ancient times, people used tea as a herbal medicine long before drinking it for pleasure. They added flowers to boost the medicinal value and sensory delights of the tea. Some blossoms commonly used in flowering tea are jasmine, calendula, globe amaranth, marigold, and lily.
One of the most classical Chinese green teas, Chunmee tea is a tea every tea lover has to try at least once. It offers a good perspective on a wide range of green tea flavors, may offer numerous benefits, and tastes great, both hot and cold. It’s produced only in China, mostly in Anhui and Jiangxi Province. The English name of this tea is "Precious Eyebrows tea" because of the small hand-rolled leaves shaped in the form that resembles eyebrows. Chunmee is produced in China and is one of the most popular green teas in western countries. Chunmee is a pan-fired tea. Pan-fired teas have a less vegetal and nuttier flavor, that can be light or more intense, depending on how the teas were made.
Gunpowder tea is loose-leaf tea that is tightly rolled into tiny pellets that resemble gunpowder. This type of tea is usually produced using green tea leaves, but not always. The benefits of gunpowder tea depend on the type of tea leaf that is used to produce it. Gunpowder tea has a unique production method. To make the highest quality gunpowder tea, artisans wither, steam, roll, and dry individual tea leaves. This tea is sometimes called pearl tea or bead tea based on the shape of each tiny tea pellet. Some people also call it Chinese gunpowder tea.
A tea bag (or "teabag") is generally agreed to be a small, porous bag used to steep tea. These bags may be sealed and filled with tea leaves, or they may be open and empty (thus allowing the tea brewer/drinker to fill it with whole-leaf tea). Many tea bags have a string attached to make removing them from the brewing vessel easier, however, this is not true for all tea bags. Generally, tea bags with a string attached also bear the name of their producer or the type of tea on a small piece of paper at the opposite end of the string from the tea bag itself.
The famous tea in the 21st century includes Xi Hu Long Jing, Jiangsu Bi Luo Chun, Huang Shan Mao Feng, Liu An Gua Pian, Fujian Bai Hao Yin Zhen, Qimen Hong Cha, Du Yu Mao Jian, Xin Yang Mao Jian, Wuyi Yan Cha, Fujian Tie Guan Yin. Most of them have a singular shape, flavor, and aroma, easily discerned from other styles, and are developed from a particular local variety of tea bush that has acquired strong and widespread appeal.
Flower tea is a mixture of tea and tisanes. In ancient times, people used tea as a herbal medicine long before drinking it for pleasure. They added flowers to boost the medicinal value and sensory delights of the tea. Some blossoms commonly used in flowering tea are jasmine, calendula, globe amaranth, marigold, and lily.
